 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-20588 rev. E 07/04 MBRS130LTR SCHOTTKY RECTIFIER 1 Amp IF(AV) = 1.0 Amp VR = 30V Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp= 5 s sine VF TJ @ 1.0Apk, TJ= 125C range Description/ Features The MBRS130LTR surface-mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Small foot print, surface mountable Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability MBRS130LTR Units 1.0 30 230 0.30 - 55 to 125 A V A V C Case Styles MBRS130LTR SMB www.irf.com 1 MBRS130LTR Bulletin PD-20588 rev. E 07/04 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) MBRS130LTR 30 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR Max. Peak One Cycle Non-Repetitive Surge Current Non- Repetitive Avalanche Energy Repetitive Avalanche Current Value 1.0 230 40 3.0 1.0 Units Conditions A A 50% duty cycle @ T L = 106 C, rectangular wave form 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse mJ A TJ = 25 C, IAS = 1A, L = 6mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. Va = 1.5 x Vr typical Following any rated load condition and with rated VRRM applied Electrical Specifications Parameters VFM Max. Forward Voltage Drop (1) Value 0.420 0.470 0.300 0.370 1 Units V V V V mA mA mA pF nH V/s @ 1A @ 2A @ 1A @ 2A TJ = 25 C TJ = 100 C TJ = 125 C Conditions TJ = 25 C TJ = 125 C IRM CT LS Max. Reverse Leakage Current (1) 10 20 VR = rated VR Max. Junction Capacitance Typical Series Inductance 200 2.0 10000 VR = 5VDC (test signal range 100KHz to 1Mhz) 25C Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300s, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Storage Temperature Range (**) 80 C/W DC operation Value - 55 to 150 25 Units C C Conditions Max. Junction Temperature Range(*) - 55 to 125 RthJL Max. Thermal Resistance Junction to Lead RthJA Max. Thermal Resistance Junction to Ambient wt Approximate Weight Case Style Device Marking (*) dPtot 1 C/W DC operation (See Fig. 4) 0.10 (0.003) g (oz.) SMB IR13L Similar to DO-214AA < thermal runaway condition for a diode on its own heatsink dTj Rth( j-a) (**) Mounted 1 inch square PCB 2 www.irf.com MBRS130LTR Bulletin PD-20588 rev. E 07/04 10 10 R evers Current - I R (mA) e 1 TJ = 125C 100C 75C 50C 0.01 25C 0.001 0.1 Instantaneous Forward Current - I F (A) 0.0001 0 10 20 30 TJ = 125C TJ = 25C 1 Reverse Voltage - VR (V) Fig. 2 - Typical Peak Reverse Current Vs. Reverse Voltage 1000 Junc tion Capa citance - C T (pF ) T = 25C J 100 0.1 0 0.2 0.4 0.6 0.8 Forward Voltage Drop - VFM (V) 10 Fig. 1 - Maximum Forward Voltage Drop Characteristics 0 10 20 30 Reverse Voltage - V (V) R Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage www.irf.com 3 MBRS130LTR Bulletin PD-20588 rev. E 07/04 130 Allowable Lead Temperature (C) Average Power Los - (Watts) s 0.5 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC RMSLimit 0.2 120 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 Square wave (D = 0.50) 80% Rated Vr applied see note (2) 0.4 DC 0.3 110 100 0.1 90 0 0.4 0.8 1.2 1.6 Average Forward Current - I F(AV) (A) Fig. 4 - Maximum Average Forward Current Vs. Allowable Lead Temperature 0 0 0.4 0.8 1.2 1.6 Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Average Forward Dissipation Vs. Average Forward Current (A) 1000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge Non-repetitive Surge Current - I FSM 100 10 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 6 - Maximum Peak Surge Forward Current Vs. Pulse Duration (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = V R1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com MBRS130LTR Bulletin PD-20588 rev. E 07/04 Outline Table Device Marking: IR13L CATHODE ANODE 2.15 (.085) 1.80 (.071) 3.80 (.150) 3.30 (.130) 1 2 4.70 (.185) 4.10 (.161) 1 POLARITY 2 PART NUMBER 2.40 (.094) 1.90 (.075) 1.30 (.051) 0.76 (.030) 0.30 (.012) 0.15 (.006) 5.60 (.220) 5.00 (.197) 2.5 TYP. (.098 TYP.) SOLDERING PAD 2.0 TYP. (.079 TYP.) 4.2 (.165) 4.0 (.157) Outline SMB Dimensions in millimeters and (inches) For recommended footprint and soldering techniques refer to application note #AN-994 Marking & Identification Each device has 2 rows for identification. The first row designates the device as manufactured by International Rectifier, indicated by the letters "IR", and the Part Number (indicates the current, the voltage rating and Schottky Generation). The second row indicates the year, the week of manufacturing and the Site ID. IR13L IR13L VOLTAGE CURRENT IR LOGO YYWWX SITE ID WEEK 2nd digit of the YEAR "Y" = 1st digit of the YEAR "standard product" "P" = "Lead-Free" www.irf.com 5 MBRS130LTR Bulletin PD-20588 rev. E 07/04 Tape & Reel Information Dimensions in millimetres and (inches) Ordering Information Table Device Code MBR 1 1 2 3 4 5 6 7 S 2 - 1 3 30 4 L 5 TR 6 7 Schottky MBR Series S = SMB Current Rating (1 = 1 A) Voltage Rating (30 = 30V) L = Low Forward Voltage none = Box (1000 pieces) TR = Tape & Reel (3000 pieces) none = Standard Production PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 07/04 6 www.irf.com |
Price & Availability of MBRS130LTR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |